REV'IT!
Caliber Men's Black Motorcycle Gloves
with Flex Knuckle Protection
The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh.
In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armour necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path.
Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.
- Goatskin leather outer shell
- Moisture wicking tri-fleece liner
- PWR|Shield at palm
- Temperfoam® knuckle, thumb knuckle & palm slider
- TPR finger knuckles
- Hook & loop closure
- Wrist strap
- Stretch at fingers, thumb and stretch fabric on the back of the hand
- Regular cuff
- Ventilation holes
- Outside stitching
- Pull tab to stop cold wind entering the sleeve
- Grip patch at palm
- Connect fingertip
- Also available in grey
- Part of the REV'IT! DIRT Series
- Level 1 KP certified - according to the EN 13594:2015 standard
Outer Shell Features:
- Goatskin - tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide
- Neoprene - a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant
- Corduroy
- PWR|Stretch mesh
- PWR|Shield at palm - created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm
- Injected ventilated flex knuckle - this knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe
- Outside stitching - the PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands
- Tri-fleece liner - this polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp
- Injected ventilated flex knuckle - this knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe
- PWR|Shield at palm - PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm
REV'IT!
Men's Caliber Motorcycle Gloves
Please note that this size guide is for this specific product only. Measure around the palm of your dominant hand, just below the knuckles, excluding the thumb. For hand length, measure from the tip of the longest finger to the crease under the palm.
| SIZE | HAND CIRCUMFERENCE | HAND LENGTH |
|---|---|---|
| XS | 18.2 - 19.3 cm | 18.9 - 19.3 cm |
| S | 19.4 - 20.6 cm | 19.4 - 19.8 cm |
| M | 20.7 - 21.9 cm | 19.9 - 20.3 cm |
| L | 22.0 - 23.1 cm | 20.4 - 20.8 cm |
| XL | 23.2 - 24.4 cm | 20.9 - 21.3 cm |
| 2XL | 24.5 - 25.7 cm | 21.4 - 21.8 cm |
| 3XL | 25.8 - 27.0 cm | 21.9 - 22.3 cm |
| 4XL | 27.1 - 28.4 cm | 22.4 - 22.8 cm |
REV'IT Leather
Care Instructions
To keep your leather REV’IT! gear in top condition, it is key to clean frequently after use. This way dirt & the occasional insect cadavers don’t build up over time.
Hot Tips: Always use a clean cloth & some lukewarm water to remove all dirt on the surface of your leather gear. Air your leather gear out after each use. Only dry at room temperature after cleaning, never in direct heat sources or light. Don’t store your leather garments in an airtight plastic bag or container. Never use cleaning products that contain bleach, solvents or other chemical products. Always refer to care labels on the garment, this is leading over any other instructions givenNever wash or dry clean leather
To waterproof & protect your leather motorcycle gear we recommend treating with a leather protector before first use which will keep it in great condition for years to come. You can continue this process anytime the leather starts to look worn or dirty. Always test on a discrete part of the garment to see how the product reacts to the different leathers before proceeding.
Moto Est. is a proud stockist of REV'IT!.
"Everything you do, you do with passion and conviction. Just like us. You’re the type of person who appreciates good product design; products that perform and live up to the highest expectations. If you are that type of person, you’ve just discovered the brand that suits your personality..."
"Everything you do, you do with passion and conviction. Just like us. You’re the type of person who appreciates good product design; products that perform and live up to the highest expectations. If you are that type of person, you’ve just discovered the brand that suits your personality..."
Shop REV'IT!
S H I P P I N G
Australia
Free shipping on orders over $250.
Flat rate shipping of $8 for all other orders.
Delivery will typically arrive within 2-4 business days to metro areas.
Free shipping on orders over $250.
Flat rate shipping of $8 for all other orders.
Delivery will typically arrive within 2-4 business days to metro areas.
International
Shipping rates are calculated at the checkout.
Delivery will typically arrive within 4-14 business days to metro areas.
R E T U R N S . P O L I C Y
Shipping rates are calculated at the checkout.
Delivery will typically arrive within 4-14 business days to metro areas.
R E T U R N S . P O L I C Y
Returned within 14 days of receipt.
